|
WINFAST STEEL INDUSTRIAL LIMITED COMPANY
|
Gold Index: 8392
Custom 2205 Duplex Stainless Steel Sheet Corrosion Resistance NO.1 2B
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Custom 2205 Duplex Stainless Steel Sheet Corrosion Resistance NO.1 2B
Duplex Stainless Steel Plate
Custom 2205 Duplex Stainless Steel Sheet Corrosion Resistance NO.1 2B
- Duplex Stainless Steel Plate
- Grade 2205 2507 S32304 S32550.S32101 S31260.etc
- Standard: ASTM JIS GB EN DIN
- Thickness: 0.4 - 60.0mm
- Width: 1000mm 1219mm 1500mm 2000mm or as required
- Brand: TISCO JISCO BAOSTEEL NIPPON
Specifications
| Commodity | Duplex stainless steel plate UNS S31260 |
| Width | 1000MM 1219mm 1500mm, 1800mm, 2000mm |
| Thickness | 0.6 – 60.0mm |
| Surface | NO.1 2B |
| Main Grade | 201 202 |
| 304 304L 309S 310S 321 316L 317L 347 329.etc | |
| 409L 410 420 430 436L 439 441 444 | |
| duplex stainless steel | |
| Nickel Alloy products | |
| Standards | ASTM A240 / JIS G4303 / GB3280-84/EN10088-1/DIN |
| Certifications | ISO 9001-2008 |
| Standard Size | 1500 * 6000mm / 1800 * 6000mm |
| Brand | TISCO BAOSTEEL / JISCO / LISCO / POSCO / OUTOKUMPU/NIPPON/CHENGDE |
| Loading Port | Shanghai Port,China |
| Paymentterms | L/C or T/T |
| Delivery time | 5 – 12 days according the quantity. |
UNS S31260 stainless steel chemical composition requirements
| UNS S31260 Chemical Composition | |||||||
| Grade | The Element Max (%) | ||||||
| C | Mn | P | S | Si | Cr | Ni | |
| UNS S31260 | 0.03 | 1.00 | 0.030 | 0.030 | 0.75 | 24-26 | 5.5-7.5 |
| Mo | N | Cu | Cb | Ti | |||
| 2.5-3.5 | 0.10-0.30 | 0.20-0.80 | |||||
Noted: UNS S31260
A . Maximum, unless range or minimum is indicated.
B Designation established in accordance with Practice E527 and SAE J1086.
C . Unless otherwise indicated, a Grade designation originally assigned by the American Iron and Steel Institute (AISI).
D . Carbon analysis shall be reported to nearest 0.01% except for the low-carbon types, which shall be reported to nearest 0.001%.
E . The terms Columbium (Cb) and Niobium (Nb) both relate to the same element.
F . When two minimums or two maximums are listed for a single type, as in the case of both value from a formula and an absolute value, the higher minimum or lower maximum shall apply.
G. Common name, not a trademark, widely used, not associated with any one producer.
H. Iron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements. I (Al +Ti) 0.85–1.20.
J. Naming system developed and applied by ASTM.
K . Cr+3.3Mo+16Np 40 min.
L . S40900 (Type 409) has been replaced by S40910, S40920, and S40930. Unless otherwise specified in the ordering information, an order specifying S40900 or Type 409 shall be satisfied by any one of S40910, S40920, or S40930 at the option of the seller. Material meeting the requirements of S40910, S40920, or S40930, may at the option of the manufacturer be certified as S40900.
M . Plate version of CA-6NM.
N Product (check or verification analysis) tolerance over the maximum limit for C and N in XM-27 shall be 0.002%.
UNS S31260 Mechanical Properties
UNS S31260 Materials for high temperature Service
SUPPLEMENTARY REQUIREMENTS
S1. Charpy Impact Testing of Plate UNS S31260
S2. Materials for High-Temperature Service UNS S31260
Chemical Composition of our duplex stainless steel
| Designation | Chemical composition % by mass max unless stated | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS No | SAE No | AISI No / Common Name | C | Si | Mn | P | S | Cr | Mo | Ni | Others |
| S31100 | - | XM-26 | 0.06 | 1.00 | 1.00 | 0.045 | 0.030 | 25.0/27.0 | - | 6.0/7.0 | Ti 0.25 |
| S31200 | - | 44LN | 0.030 | 1.00 | 2.00 | 0.045 | 0.030 | 24.0/26.0 | 1.20/2.00 | 5.5/6.5 | N 0.14/0.20 |
| S31260 | - | DP3 | 0.03 | 0.75 | 1.00 | 0.030 | 0.030 | 24.0/26.0 | 2.5/3.5 | 5.5/7.5 | N 0.10./0.30; Cu 0.20/0.80; W 0.10/0.50 |
| S31500 | - | 3RE60 | 0.03 | 1.4/2.0 | 1.2/2.0 | 0.03 | 0.03 | 18.0/19.0 | 2.5/3.0 | 4.25/5.25 | N 0.05/0.10 |
| S31803 | - | 2205 | 0.030 | 1.00 | 2.00 | 0.030 | 0.020 | 21.0/23.0 | 2.5/3.5 | 4.5/6.5 | N 0.08/0.20 |
| S32001 | - | Nitronic 19D | 0.030 | 1.00 | 4.0/6.0 | 0.040 | 0.030 | 19.5/21.5 | 0.60 | 1.00/3.00 | N 0.05/0.17; Cu 1.00 |
| S32003 | - | AL 2003 | 0.030 | 1.00 | 2.00 | 0.030 | 0.020 | 19.5/22.5 | 1.50/2.00 | 3.0/4.0 | N 0.14/0.20 |
| S32101 | - | LDX 2101 | 0.040 | 1.00 | 4.0/6.0 | 0.040 | 0.030 | 21.0/22.0 | 0.10/0.80 | 1.35/1.70 | N 0.20/0.25; Cu 0.10/0.80 |
| S32202 | DX 2202 | 0.030 | 1.00 | 2.00 | 0.040 | 0.010 | 21.5/24.0 | 0.45 | 1.00/2.80 | N 0.18.0.26 | |
| S32205 | - | 2205 UR45N | 0.030 | 1.00 | 2.00 | 0.030 | 0.020 | 22.0/23.0 | 3.0/3.5 | 4.5/6.5 | N 0.14/0.20 |
| S32304 | - | 2304 | |||||||||
